The computers must be updated if you want the long term. Part of the maintenance is cleaning your computer. Below are some tips for cleaning your keyboard, CD-ROMs, computer parts and mice. Cleaning your computer on a permanent basis, the cooling and the performance of the components. Cleaning prevents your computer from damage and keep the dust from your heating system for any breach of your equipment.
Place the computer on the ground is not good. Instead, make sure you place it on a shelf or table. In the cleaning of your computer, remove the power of your system first. All cables and connectors must be eliminated at the back of your computer.
Use a vacuum with compressed air for cleaning the back of your system. Use a damp cloth or slightly cooked dry cleaning and hand towel to remove it.
Not cleaning of the board or within a part of the computer with glasses of clothing. Do not eat or drink to your computer to cause food to get into your keyboard or on your system.
Dirty CD lens can read or write errors in your CD and cause interference, so you have to clean the disk. Here are some tips for cleaning your CD-ROM:
Make sure that your information will not be removed and you're not as good.
To clean the objective reader, make sure you always use laser lens cleaner
Set the lens of his own laser disc and play at least two minutes.
If your hard disk still has problems, you must May to open and use a cotton swab to clean the lens.
If your keyboard looks dirty or appears does not work, may need to be cleaned. Cleaning the keyboard requires that your computer and unplug the keyboard. Use the same compressed air, vacuum and clean the keys. Use a damp cloth dress your keyboard. Maybe you want on your keyboard at night to prevent dust.
Cleaning your mouse is a requirement, because it is so widely used and is a show of hands. If the mouse is the exercise slowly, it is time to clean the mouse. To clean the mouse, you at the back of the computer and read the manual from the manufacturer for cleaning advice.
Was the ball inside your mouse and thoroughly with a dry cloth. Remove dust in the cabinet where the ball is to eliminate any dust on the rolls. Use a cotton swab. Dry weather, then put back together and reconnect to your computer.
Your computer should also supervise the cleaning. Like the other components, make sure you pull the monitor and use a damp cloth to clean the screen. You can now use a dry towel to dry your hand and then again on your computer.
0 Comments